Venting

Power Vent Termination [4x6 5/8 to 5x8] 706-922 for gas venting Genuine OEM Part

3PVP-VCTB33 is a black prairie termination cap with a 3 inch exhaust vent and a 3 inch air intake. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-VCTB34 is a black prairie termination cap with a 4 inch exhaust and 3 inch air intake. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-VCT33 is a stainless steel prairie termination cap with a 3 inch exhaust vent and a 3 inch air intake. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-VCT34 is a stainless steel prairie termination cap with a 4 inch exhaust and 3 inch air intake. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

Replacement Queen Cap Top for Hearth and Home Technology family heating units.Genuine OEM part May fit other models, please check your owner's manual for part number compatibility. 

3PVP-ADS is a galvalume quick release PelletVent adapter with a 3 inch diameter. This is an OEM DuraVent venting component.

4PVP-ADS is a galvalume quick release PelletVent adapter with a 4 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

DVP-TRAP2 is a horizontal termination cap with long flue, attached slip and wall shield with heat shield. 5 3/8/" - 9 3/8"   Genuine OEM Venting Component.

DVP-TRAP1 is a Horizontal Termination cap with short flue. This cap has the slip, wall shield and heat shield attached. This is an OEM Majestic Venting Component.

DVP-RVTK is a Rear Vent Termination Kit. This kit includes adjacent Termination Cap, 1 Inch Firestop and a 9 Inches to 12 Inches Adjacent Termination Pipe.

Rear Venting Kit [includes Rigid Flue Assembly, Hot Touch Termination which telescopes between 7''-13'' walls & firestop] used on old Majestic and Vermont Castings heating units. Call us for additional 7TDV product. Genuine OEM part    

6DT-CS24RIS is a 24 inch reduced square ceiling support box with attic insulation shield. This has an inner diameter of 6 inches and is used with DuraTech pipe. This is an OEM DuraVent venting component.

58DVA-X46 is a reducer from a inner diameter of 5 inches x 8 inches to an inner diameter of 4 inches by 6 5/8 inches. This is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

3PVP-RC is a black reduction collar with a 3 inch diameter and is used with PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-RC is a 4 inch diameter black reduction collar for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.