Venting

46DVA-HSCH-C is a copper high wind sconce termination cap with an inner diameter of 4 inches by 6-5/8 inches. The high wind sconce termination cap is used with DirectVent Pro Pipe. This is an OEM DuraVent venting component.

58DVA-HSCH-C is a copper high wind sconce termination cap with an inner diameter of 5 inches by 8 inches. The high wind sconce termination cap is used with DirectVent Pro Pipe. This is an OEM DuraVent venting component.

46DVA-HSCH-S is a stainless steel high wind sconce termination cap with an inner diameter of 4 inches by 6-5/8 inches. The high wind sconce termination cap is used with DirectVent Pro Pipe. This is an OEM DuraVent venting component.

58DVA-HSCH-S is a stainless steel high wind sconce termination cap with an inner diameter of 5 inches by 8 inches. The high wind sconce termination cap is used with DirectVent Pro Pipe. This is an OEM DuraVent venting component.

46DVA-VCH is a galvanized high wind termination cap with an inner diameter dimension of 4 inches x 6-5/8 inches. This cap is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

58DVA-VCH is a galvanized high wind termination cap with an inner diameter dimension of 5 inches x 8 inches. This cap is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

3PVP-HC2 is a stainless steel horizontal cap with tapered end and a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

DVP-HPC2 is a Horizontal High Performance Termination Cap. The high performance cap includes a long flue with attached slip, wall shield and heat shield. This is an OEM Majestic Venting Component.

DVP-HRC-ZC-SS is the horizontal high rise termination cap with glass termination base, and stainless steel direct vent pipe. This is an OEM Majestic Venting Component.

SLP-HHW2 is a Horizontal High Wind Trapezoid Termination. This terminatin includes one wall firestop. This is an OEM Majestic venting component.

3PVP-KHA is a 3 inch diameter horizontal termination kit. This kit includes a round horizontal cap, wall thimble for a 1 inch clearance and a black appliance adapter. This pellet vent is used with PelletVent Pro pipe and is an OEM DuraVent venting kit.

4PVP-KHA is a 4 inch diameter horizontal termination kit. This kit includes a round horizontal cap, wall thimble for a 1 inch clearance and a black appliance adapter/increaser to go from 3 inch diameter to 4 inch diameter. This pellet vent is used with...

DVP-TB1 is a Horizontal Snorkel Cap for Basement Applications. This is an OEM Majestic Venting Component.

SLP-HRC-SS is the Horizontal Stainless Steel High-Rise Termination with wall firestop. This is an OEM Majestic venting component.

46DVA-HTC is a 4 inch by 6-5/8 inch diameter horizonal termination kit trap top for use with DirectVent pipe. This is an OEM DuraVent venting component.

46DVA-KHA is a horizontal termination kit. This kit includes 90 Degree black Elbow, Ceiling Support/Wall Thimble Cover, 24” black Pipe, 8 1?2” black Pipe Extension. Termination cap not included. The inner diameter dimension is 4 inches by 6-5/8 inches...