Venting

46DVA-X58 is a galvanized 4 inch by 6-5/8 inch to 5 inch by 8 inch increaser. This is used with DirectVent pipe and is an OEM DuraVent venting component.

5DBK-X6 is a Increaser 5" - 6" [Black] with an inner diameter of 6 inches. This is used with DuraBlack DuraVent. DuraBlack is an economical, Drip free, single-waqll stovepipe with dieformed end fittings. Genuine OEM product.

7DBK-X8 is a Increaser 7" - 8" [Black] with an inner diameter of 8 inches. This is used with DuraBlack DuraVent. DuraBlack is an economical, Drip free, single-waqll stovepipe with dieformed end fittings. Genuine OEM product.

3PVP-TADX4B1 is a black increaser adapter with clean-out tee cap. This increaser takes the pipe from a 3 inch diameter to a 4 inch diameter. The increaser adapter is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-TADX41 is a galvalume increaser adapter with clean-out tee cap. This increaser takes the pipe from a 3 inch diameter to a 4 inch diameter. The increaser adapter is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-T3B1 is a black 4 inch diameter increaser tee with clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-T31 is a galvalume 4 inch diameter increaser tee with clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

Power vent fan terminal is incorporated into the vent run. Allows for both horizontal and vertical termination. Wall thimble (946-763) is required for horizontal terminations when using this system. Genuine OEM part

6DT-IWT is a 6 inch diameter insulated wall thimble for use with DuraTech pipe. This is an OEM DuraVent venting component.

8DT-IWT is a insulated wall thimble. Adjusts from a minimum of 5½“ to a maximum of 9½” wall thickness, fits between standard wall studs and the interior trim is painted black. To accommodate thicker walls, the telescoping pieces can be extended up to 16”...

JB877 is a Joint Band for 8 Inner/10.5 Outer Chimney SL300 series pipe. This is an OEM Majestic venting component.

JB577 is a Joint Bands for the SL1100 Series pipe. This is used to seal pipe connections at the joints.

Replacement King Cap Top for Hearth and Home Technology family heating units.Genuine OEM part May fit other models, please check your owner's manual for part number compatibility. 

Replacement Knight Cap Top for Hearth and Home Technology family heating units.Genuine OEM part May fit other models, please check your owner's manual for part number compatibility. 

6DT-F6L is a large base adjustable roof flashing with a pitch of 0/12 - 6/12. This flashing has a 6 inch diameter and is used with DuraTech pipe. The flashing is an OEM DuraVent venting component.

8DT-F6L is a 8 inch diameter 0/12-6/12 large base adjustable roof flashing for use with DuraTech venting. This is a genuine manufacturer venting component.