Wood

Replacement outside air kit for IronStrike wood stoves with pedestals. Fits the following models: IronStrike Wood Stoves: STRIKER S160 (pedestal models only) STRIKER SWS160 (pedestal models only) PERFORMER S210 (lpedestal models only) May fit other...

Outside Air Panel and Channel Kit for the Ironstrike Tahoma wood stoves and Superior wood stoves.   Part # F4062 Original OEM part.

Outside Air Kit (4’’ I.D. x 10 ft. long insulated flex) for the Ironstrike and Superior wood stoves.    Part # UZI Original OEM part.

4" Flex Adapter for the Ironstrike and Superior wood stoves.    Part # UZIAD Original OEM part.

6" female to 5" male plug type adapter provides short transition for your stove. 22 Guage Recommend using 1A51H200 touch-up paint for installation.

The National Chimney DBP635BK is a 6” x 35’ Stainless Steel Chimney Liner Kit for wood inserts that includes Appliance Adapter, 35ft Pre Insulated Stainless Steel Liner, Top Plate, Chimney Cap.

The National Chimney DBP625KIT is a 6” x 25’ Stainless Steel Chimney Liner Kit for Wood Stoves that includes Tee, Tee Cap, 25’ Pre-Insulated Stainless Steel Liner, Top Plate, Chimney Cap.

8DP-VC is a 8 inch diameter chimney cap for use with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.

8DP-XRB is a 8 inch diameter extended roof bracket for use with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.

8DP-F12DSA is a dead soft aluminum adjustable roof flashing with a pitch of 7/12-12/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F6DSA is a dead soft aluminum adjustable roof flashing with a pitch of 0/12-6/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F24 is a galvalume ventilated adjustable roof flashing with a pitch of 19/12-24/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F18 is a galvalume ventilated adjustable roof flashing with a pitch of 13/12-18/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F12 is a galvalume ventilated adjustable roof flashing with a pitch of 7/12-12/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F6 is a galvalume ventilated adjustable roof flashing with a pitch of 0/12-6/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-FF is a tall cone ventilated galvalume flat roof flashing. The flat roof flashing has a 8 inch diameter and is used with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.