Gas

46DVA-FF is a galvanized flat roof flashing with inner diameter dimensions of 4 inches by 6-5/8 inches. This is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

58DVA-FF is a galvanized flat roof flashing with inner diameter dimensions of 5 inches by 8 inches. This is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

Regency Flex Length 2" X 35' Flex Liner - 948-316 Regency Gas Inserts L234 LRI3E HRI3E May work with other units.  Check installation manual for compatibility. Recommend using Vertical Vent Cap Co-Linear 946-582 with this. Genuine OEM Part

Regency Flex Length 4" X 35' Flex Liner - 948-336 Regency Gas Inserts Gi33 LRI6E HRI6E May work with other units.  Check installation manual for compatibility. Recommend using Vertical Vent Cap Co-Linear 946-588 with this. Genuine OEM Part

948-367/P is a 4 inches by 6-7/8 inches flex to flex adapter. Genuine OEM part

This is flexible venting (15'x2" and 15'x3') for your Enviro gas stove. Fits the following models: Enviro Gas Stoves: E20 Sonnet Enviro part # 50-1512OEM Enviro part  

50-3788 is the flex vent adapter collars in a set of two. The dimensions are 4 inches by 7 inches. Works on the following Enviro gas units: G39 Q1 Q2 Q3 U30 U30 Tall U30 Screened   This is an OEM Enviro venting component.

50-3789 is the flex vent adapter collars in a set of two. The dimensions are 5 inches by 8 inches. Works on the following Enviro units: C34 C44 C60 C60 Tall C72 E25 G42 G50 U30 U30 Tall U30 Screened U50 U50 Tall U50 Screened U70 U70 Tall U70 Screened ...

The FSDHAGSLP is a Freestanding Draft Hood Adapter for use on Vermont Castings' direct vent gas stoves.

DVP-HPC1 is the High Performance Termination Cap. This cap has a short flue with attached slip, wall shield and heat shield. This is an OEM Majestic Venting Component.

DVP-TVHW is a High Wind Vertical Termination Cap with Storm Collar. The high wind cap is used with approved Majestic Direct Vent Pipe. This is an OEM Majestic Venting Component.

46DVA-HSCH is a galvanized high wind sconce termination cap with an inner diameter of 4 inches by 6-5/8 inches. The high wind sconce termination cap is used with DirectVent Pro Pipe. This is an OEM DuraVent venting component.

58DVA-HSCH is a galvanized high wind sconce termination cap with an inner diameter of 5 inches by 8 inches. The high wind sconce termination cap is used with DirectVent Pro Pipe. This is an OEM DuraVent venting component.

46DVA-HSCH-C is a copper high wind sconce termination cap with an inner diameter of 4 inches by 6-5/8 inches. The high wind sconce termination cap is used with DirectVent Pro Pipe. This is an OEM DuraVent venting component.

58DVA-HSCH-C is a copper high wind sconce termination cap with an inner diameter of 5 inches by 8 inches. The high wind sconce termination cap is used with DirectVent Pro Pipe. This is an OEM DuraVent venting component.

46DVA-HSCH-S is a stainless steel high wind sconce termination cap with an inner diameter of 4 inches by 6-5/8 inches. The high wind sconce termination cap is used with DirectVent Pro Pipe. This is an OEM DuraVent venting component.