Venting

4PVP-CC is a 4 inch diameter galvalume C-Clamp for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

50-3884 is the C/G Series IPI Power Vent kit with 110 feet of wiring. This requires the 50-4161 module. Works on the following Enviro gas units: C34 C44 C60 C60 Tall C72 G39 G42 G50 This is an OEM Enviro installation component.

3PVP-CS is a black cathedral ceiling support box with a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-CS is a black 4 inch diameter cathedral ceiling support box. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

46DVA-CS is a a galvanized cathedral ceiling support box with an inner diameter of 4 inches x 6-5/8 inches. This is an OEM DuraVent venting component.

58DVA-CS is a a galvanized cathedral ceiling support box with an inner diameter of 5 inches x 8 inches. This is an OEM DuraVent venting component.

DVP-FSM is a pack of 10 Ceiling Firestops for approved Majestic units. This is an OEM Majestic venting component.

SLP-FS is a Ceiling Firestop to be used with SL pipe. This is an OEM Majestic venting component.

46DVA-FS is a galvanized ceiling firestop for use with DirectVent Pro DuraVent pipe. This has an inner diameter dimension of 4 inches by 6-5/8 inches. This is an OEM DuraVent venting component.

58DVA-FS is a galvanized ceiling firestop for use with DirectVent Pro DuraVent pipe. This has an inner diameter dimension of 5 inches by 8 inches. This is an OEM DuraVent venting component.

3PVP-FS is a ceiling support firestop spacer for 1 inch clearance. This has a 3 inch diameter and is used with PelletVent Pro pipe. This is also a OEM DuraVent venting component.

4PVP-FS is a black ceiling support firestop spacer for 1 inch clearance. This has a 4 inch diameter and is used with PelletVent Pro pipe, it is also an OEM DuraVent venting component.

3PVP-WTC is a black ceiling support with wall thimble cover with a 3 inch diameter and is used with PelletVent Pro pipe. This is an OEM DuraVent venting component.

Ceramic Insulation 1"x 24"x5' (not foiled backed) - CF6-1-24x25-5. Insert the ceramic insuation around liner kits to prevent outside air from coming into the house.

6DT-CAI is a chase air intake with rodent guard. This has a 6 inch diameter and is used with DuraTech pipe. This is also a OEM DuraVent venting component.

6DT-CTF is a 6 inch diameter DuraTech chase top flashing. This is an OEM DuraVent venting component.