Venting

3PVP-IS is a galvalume 3 inch diameter attic insulation shield for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-IS is a 4 inch diameter galvalume attic insulation shield for use with the PelletVent Pro pipe. This is an OEM DuraVent venting component.

46DVA-IS is a galvanized attic insulation shield with an inner diameter of 4 inches by 6-5/8 inches. This is used with DirectVent Pro DuraVent pipe. This is an OEM DuraVent venting component.

AS10 is an Attic Insulation Shield for a straight flue. This does not include the firestop. The AS10 is for SL1100 and SL400 series pipe.

58DVA-IS is a galvanized attic insulation shield with an inner diameter of 5 inches by 8 inches. This is used with DirectVent Pro DuraVent pipe. This is an OEM DuraVent venting component.

6DT-IS is a 6 inch diameter attic insulation shield for use with DuraTech pipe. This is an OEM DuraVent venting component.

Attic insulation shield used on old Majestic and Vermont Castings heating units. Call us for additional 7TDV product. Genuine OEM part    

8DT-IS is a double wall attic insulation shield for use with the 8 inch diameter DuraTech venting. This is a genuine manufacturer venting component.

Right works with 8 Inch Chimney Systems from the IHP family of heating units, including Lennox, Ironstrike, Astria, Superior and more. Check your owner's manual for additional brands. Genuine OEM part

This Draft Hood Adaptor is a complete assembly and is ready to fit onto your gas stove in a vertical vent application only. With the Drafthood Adaptor correctly installed and wired to the gas control valve. Your Direct Vent Fireplace can be vented like a...

This Draft Hood Adaptor is a complete assembly and is ready to fit onto your gas stove in a vertical vent application only. With the Draft Hood Adaptor correctly installed and wired to the gas control valve, your Direct Vent fireplace can be vented like...

6DP-BP is a 6 inch diameter base plate for use with DuraPlus triple-wall pipe. This is an OEM DuraVent venting component.

7DP-BP is a 7 inch diameter base plate for use with DuraPlus Triple Wall pipe. This is an OEM DuraVent venting component.

8DP-BP is a 8 inch diameter base plate for use with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.

8DT-BT is a base tee of stainless steel double wall stove pipe. This tee has an 8 inch diameter and is used with DuraVent chimney systems. This is an OEM DuraVent ventng component.

6DP-KTUP is a basic through-the-ceiling kit for use with DuraPlus pipe. This kit includes a DuraBlack chimney adapter, snap-lock adapter, 11 inch square ceiling support box with built-in starter section and trim, adjustable flashing 0/12 - 6/12, chimney...