Venting

DVP-TRAPFL is a Trap Cap Rain Flashing. This is an OEM Majetic Venting Component.

TS345 is a trapezoid termination cap that is used with the SL300 series pipe. This is an OEM Majestic venting component.

SLP-FLEX-TRAP is the Trapezoid Termination Kit. This kit includes the cap and wall thimble. This is an OEM Majestic Venting Component.

46DVA-TCL is a galvalume travis industries co-axial to co-linear adapter. The adapter fits two 3 inch flex liners to 4 inch by 6-5/8 inch pipe. This is used with DirectVent pipe and is an OEM DuraVent venting component.

6DBK-TC is a Trim Collar [Black] with an inner diameter of 6 inches. This is used with DuraBlack DuraVent. DuraBlack is an economical, Drip free, single-waqll stovepipe with dieformed end fittings. Genuine OEM product.

8DBK-TC is a Trim Collar [Black] with an inner diameter of 8 inches. This is used with DuraBlack DuraVent. DuraBlack is an economical, Drip free, single-waqll stovepipe with dieformed end fittings. Genuine OEM product.

6DT-RSTC3 is a 6 inch diameter trim collar for the roof support with a pitch of 0/12 to 3/12. This is used with DuraTech pipe and is an OEM DuraVent venting component.

8DT-RSTC3 is a 8 inch diameter trim collar for roof support. This collar is for 0/12-3/12 pitch. This is a genuine manufacturer venting component.

6DT-RSTC12 is a 6 inch diameter trim collar for the roof support with a pitch of 10/12 to 12/12. This is used with DuraTech pipe and is an OEM DuraVent venting component.

8DT-RSTC12 is a 8 inch diameter trim collar for roof support. This collar is for 10/12-12/12 pitch. This is a genuine manufacturer venting component.

6DT-RSTC6 is a 6 inch diameter trim collar for the roof support with a pitch of 4/12 to 6/12. This is used with DuraTech pipe and is an OEM DuraVent venting component.

8DT-RSTC6 is a 8 inch diameter trim collar for roof support. This collar is for 4/12-6/12 pitch. This is a genuine manufacturer venting component.

6DT-RSTC9 is a 6 inch diameter trim collar for the roof support with a pitch of 7/12 to 9/12. This is used with DuraTech pipe and is an OEM DuraVent venting component.

8DT-RSTC9 is a 8 inch diameter trim collar for roof support. This collar is for 7/12-9/12 pitch. This is a genuine manufacturer venting component.

5DT-TCR is a round trim collar measuring 5 inches to 6 inches for the round support box with an inner diameter of 6 inches. This is used with DuraTech pipe and is an OEM DuraVent venting component.

5DT-TC is the square trim collar measuring 5 inches to 6 inches for the round support box with an inner diameter of 6 inches. This is used with DuraTech pipe and is an OEM DuraVent venting component.