Venting

7DBK-X8 is a Increaser 7" - 8" [Black] with an inner diameter of 8 inches. This is used with DuraBlack DuraVent. DuraBlack is an economical, Drip free, single-wall stovepipe with die-formed end fittings.   ApplicationsSingle-wall interior...

3PVP-TADX4B1 is a black increaser adapter with clean-out tee cap. This increaser takes the pipe from a 3 inch diameter to a 4 inch diameter. The increaser adapter is used with PelletVent Pro pipe. ApplicationsPelletVent Pro® is a venting system...

3PVP-TADX41 is a galvalume increaser adapter with clean-out tee cap. This increaser takes the pipe from a 3 inch diameter to a 4 inch diameter. The increaser adapter is used with PelletVent Pro pipe. ApplicationsPelletVent Pro® is a venting system...

4PVP-T3B1 is a black 4 inch diameter increaser tee with clean-out tee cap. This is used with PelletVent Pro pipe. ApplicationsPelletVent Pro® is a venting system designed for stoves and inserts that use wood pellets and oil fuel. It is also built to...

4PVP-T31 is a galvalume 4 inch diameter increaser tee with clean-out tee cap. This is used with PelletVent Pro pipe. ApplicationsPelletVent Pro® is a venting system designed for stoves and inserts that use wood pellets and oil fuel. It is also built...

6DT-IWT is a 6 inch diameter insulated wall thimble for use with DuraTech pipe.With a Thermal Tech blanket insulation encased between dual walls, DuraTech offers the optimum in safety and performance. It keeps the outer wall of the chimney cool, while...

8DT-IWT is a insulated wall thimble. Adjusts from a minimum of 5 ½“ to a maximum of 9 ½” wall thickness, fits between standard wall studs and the interior trim is painted black. To accommodate thicker walls, the telescoping pieces can be extended up to...

Insulation Shield [6SPIS], 6 Inch Snap-Pak Wood Chimney, Built to UL103HT. Additional venting is required to complete the venting system based on the structure.Genuine OEM Part

Insulation Shield [7SPIS], 7 Inch Snap-Pak Wood Chimney, Built to UL103HT. Additional venting is required to complete the venting system based on the structure. Genuine OEM Part

Insulation Shield [8DVLIS], 8DVL Gas Direct Vent, Lock System. Additional venting is required to complete the venting system based on the structure. Recommend using High Temperature Silicone (SIL500) to install. Genuine OEM Part

Interior HTK 6" Collar for Kozy heating units.   Genuine OEM part

Interior HTK 6" Duct Boot for Kozy heating units.   Genuine OEM part

Interior HTK 6" Insulated Flex Pipe for Kozy heating units.   Genuine OEM part

Interior HTK Band Clamp for Kozy heating units.   Genuine OEM part

JB577 is a Joint Bands for the SL1100 Series pipe. This is used to seal pipe connections at the joints.

JB877 is a Joint Band for 8 Inner/10.5 Outer Chimney SL300 series pipe. Genuine OEM Part