Pellet

4PVP-KHA is a 4 inch diameter horizontal termination kit. This kit includes a round horizontal cap, wall thimble for a 1 inch clearance and a black appliance adapter/increaser to go from 3 inch diameter to 4 inch diameter. This pellet vent is used with...

3PVP316-20KFB is a 304 length factory-built chimney reline kit. This kit includes a vertical cap, storm collar, support bracket, ventilation disk, centering bracket, 12 inch length of pipe, flex connector, flex length adjustable band and a flex adapter...

3PVP304-20KFB is a 304 length factory-built chimney reline kit. This kit includes a vertical cap, storm collar, support bracket, ventilation disk, centering bracket, 12 inch length of pipe, flex connector, flex length adjustable band and a flex adapter...

3PVP-CC is a 3 inch diameter PelletVent Pro C-Clamp. This is an OEM DuraVent venting component.

3PVP-X8 is a black chimney adapter that is used to transition from 3 inch diameter PelletVent Pro pipe to a 8 inch diameter DuraVent pipe. This is an OEM DuraVent venting component.

3PVP-X7 is a black chimney adapter that is used to transition from 3 inch diameter PelletVent Pro pipe to a 7 inch diameter DuraVent pipe. This is an OEM DuraVent venting component.

3PVP-X6 is a black chimney adapter that is used to transition from 3 inch diameter PelletVent Pro pipe to a 6 inch diameter DuraVent pipe. This is an OEM DuraVent venting component.

3PVP-GA1 is a pack of 12, 3 inch diameter replacement gaskets for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

3PVP-GA is a 3 inch diameter replacement gasket for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

9494 is a snow splitter used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-X4 is a galvalume 3 inch to 4 inch increaser for a PelletVent Pro pipe. This is an OEM DuraVent venting component.

3PVP-RC is a black reduction collar with a 3 inch diameter and is used with PelletVent Pro pipe. This is an OEM DuraVent venting component.

3PVP-WTC is a black ceiling support with wall thimble cover with a 3 inch diameter and is used with PelletVent Pro pipe. This is an OEM DuraVent venting component.

3PVP-F12DS is a Dead Soft Aluminum Adjustable Roof Flashing with a 7/12-12/12 pitch. This has a 3 inch diameter and is used with PelletVent Pro pipe. It is also a OEM DuraVent venting component.

3PVP-F6DS is a Dead Soft Aluminum Adjustable Roof Flashing with a 0/12-6/12 pitch. This has a 3 inch diameter and is used with PelletVent Pro pipe. It is also a OEM DuraVent venting component.

3PVP-FF is a galvalume tall cone roof flashing with a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.