Pellet

4PVP-IS is a 4 inch diameter galvalume attic insulation shield for use with the PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-CC is a 4 inch diameter galvalume C-Clamp for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-CS is a black 4 inch diameter cathedral ceiling support box. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-FS is a black ceiling support firestop spacer for 1 inch clearance. This has a 4 inch diameter and is used with PelletVent Pro pipe, it is also an OEM DuraVent venting component.

The 4PVP-X6 is a PelletVent Pro chimney adapter that is used to transition between 4 inch PelletVent Pro pipe to existing chimney that is 6 inches and DuraVent brand. 4PVP-X6 is a OEM DuraVent venting component.

The 4PVP-X7 is a PelletVent Pro chimney adapter that is used to transition between 4 inch PelletVent Pro pipe to existing chimney that is 7 inches and DuraVent brand. 4PVP-X7 is a OEM DuraVent venting component.

The 4PVP-X8 is a PelletVent Pro chimney adapter that is used to transition between 4 inch PelletVent Pro pipe to existing chimney that is 8 inches and DuraVent brand. 4PVP-X8 is a OEM DuraVent venting component.

4PVP-COB1 is a black 4 inch diameter clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-CO1 is a galvalume 4 inch diameter clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-DBTB1 is a black 4 inch diameter double tee with clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-DBT1 is a galvalume 4 inch diameter double tee with clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-F6DS is a 4 inch diameter dead soft aluminum adjustable roof flashing for 0/12-6/12 pitch. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-F12DS is a 4 inch diameter dead soft aluminum adjustable roof flashing for 7/12-12/12 pitch. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP304-35KFB is a 304 length factory-built chimney reline kit. This kit includes a vertical cap, storm collar, support bracket, ventilation disk, centering bracket, 12 inch length of pipe, flex connector, 35 foot flex length, adjustable band and a flex...

4PVP316-35KFB is a 316 length factory-built chimney reline kit. This kit includes a vertical cap, storm collar, support bracket, ventilation disk, centering bracket, 12 inch length of pipe, flex connector, 35 foot flex length, adjustable band and a flex...

4PVP-ADFF is a Galvalume female flex adapter with a 4 inch diameter for PelletVent Pro pipe. This is an OEM DuraVent venting component.