Gas

58DVA-HC-C is a copper square horizontal termination cap with an inner diameter of 5 inches by 8 inches. This cap is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

46DVA-HC-S is a stainless steel square horizontal termination cap with an inner diameter of 4 inches by 6-5/8 inches. This cap is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

58DVA-HC-S is a stainless steel square horizontal termination cap with an inner diameter of 5 inches by 8 inches. This cap is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

58DVA-F12 is a galvanized steep roof flashing with an inner diameter of 5 inches by 8 inches. This is used with DuraVent DirectVent Pro Pipe. This is an OEM DuraVent venting component.

46DVA-SC is a galvanized storm collar with inner diameter dimensions of 4 inches by 6-5/8 inches. This storm collar is used with DirectVent Pro DuraVent pipe. This is an OEM DuraVent venting component.

58DVA-SC is a galvanized storm collar with inner diameter dimensions of 5 inches by 8 inches. This storm collar is used with DirectVent Pro DuraVent pipe. This is an OEM DuraVent venting component.

LINK-STOVE is a Stove Adapter Kit. This kit includes 30 feet of 4 inch Flex, adapters, wall thimble, masonry, zero clearance flashing, 991DA cap and fasteners. This is an OEM venting component.

SV4.5HT-2, Horizontal Termination Kit includes firestop/spacer [H2246], termination, slip piece [74L61]. Additional venting is required to complete the venting system based on the structure. This is for rigid pipe use.  If using flex pipe use H1969...

DVP-TRFK is the Thru Roof Flex Termination Kit from Majestic. This includes the Vertical Termination Cap with Storm Collar, 24 Inch DVP Pipe/Roof Support and Flex Adapters. This is an OEM Majestic Termination Kit.

SLP-TRAPK1 is a top vent horizontal termination kit number 1. This kit includes a horizontal trapezoid termination, slip section, wall shield and 90 degree elbow. This is an OEM Majestic venting component.

SLP-TRAPK2 is a top vent horizontal termination kit #2. The kit includes the horizontal trapezoid termination, slip section, wall shield and 90 degree elbow. Genuine OEM Venting Component.

DVP-HSFTK is a Horizontal Vent Termination Kit from Majestic. This Kit includes Adjacent Termination Cap, 1 Inch Firestop, 30 Inch Flex and Adapters. Recommend using High Strength Silicone (SIL500) and High Temperature Sealant (Millpac) to install...

DVP-TRAPK2 is the Horizontal Termination Kit. This kit includes the horizontal termination cap with long flue, slip section, wall shield and 90 degree elbow. This is an OEM Majestic Venting Component.

DVP-TRAPK1 is a Horizontal Termination Kit for direct vent pipe. This kit includes a short flue, slip section, wall shiled and 90 degree elbow. This is an OEM Majestic Venting Component.

DVP-TRAPFL is a Trap Cap Rain Flashing. This is an OEM Majetic Venting Component.

SLP-FLEX-TRAP is the Trapezoid Termination Kit. This kit includes the cap and wall thimble. This is an OEM Majestic Venting Component.