Gas

SLP-TRAPK1 is a top vent horizontal termination kit number 1. This kit includes a horizontal trapezoid termination, slip section, wall shield and 90 degree elbow. This is an OEM Majestic venting component.

SLP-TRAPK2 is a top vent horizontal termination kit #2. The kit includes the horizontal trapezoid termination, slip section, wall shield and 90 degree elbow. Genuine OEM Venting Component.

DVP-HSFTK is a Horizontal Vent Termination Kit from Majestic. This Kit includes Adjacent Termination Cap, 1 Inch Firestop, 30 Inch Flex and Adapters. Recommend using High Strength Silicone (SIL500) and High Temperature Sealant (Millpac) to install...

DVP-TRAPK2 is the Horizontal Termination Kit. This kit includes the horizontal termination cap with long flue, slip section, wall shield and 90 degree elbow. This is an OEM Majestic Venting Component.

DVP-TRAPK1 is a Horizontal Termination Kit for direct vent pipe. This kit includes a short flue, slip section, wall shiled and 90 degree elbow. This is an OEM Majestic Venting Component.

DVP-TRAPFL is a Trap Cap Rain Flashing. This is an OEM Majetic Venting Component.

SLP-FLEX-TRAP is the Trapezoid Termination Kit. This kit includes the cap and wall thimble. This is an OEM Majestic Venting Component.

46DVA-TCL is a galvalume travis industries co-axial to co-linear adapter. The adapter fits two 3 inch flex liners to 4 inch by 6-5/8 inch pipe. This is used with DirectVent pipe and is an OEM DuraVent venting component.

46DVA-WTU is a galvanized universal wall thimble for use with the DirectVent Pro DuraVent pipe. This wall thimble has an inner diameter of 4 inches x 6-5/8 inches. This is an OEM DuraVent venting component.

58DVA-WTU is a galvanized universal wall thimble for use with the DirectVent Pro DuraVent pipe. This wall thimble has an inner diameter of 5 inches x 8 inches. This is an OEM DuraVent venting component.

946-208/P is a vent guard for use with part 640-530/P. Genuine OEM part

Vent Termination 8'' X 12'' Flue used on old Majestic and Vermont Castings heating units. Call us for additional 7TDV product. Genuine OEM part    

0002768 is a galvanized appliance adapter with an inner diameter of 4 inches by 6-5/8 inches. This is used with double wall Direct Vent Pro pipe.   This is an OEM DuraVent venting component.

46DVA-VCL is a Vermont Castings co-axial to co-linear appliance connector with an inner diameter dimension of 4 inches by 6-5/8 inches. This is an OEM DuraVent venting component.

DVP-TV is a Vertical Direct Vent Termination Cap that comes with the Storm Collar. This is an OEM Majestic Venting Component.

946-770 is a vertical flex additional floor kit. This kit includes a ceiling firestop and a firestop spacer that is used to prevent debris from falling into the firestop. Genuine OEM part