Gas

46DVA-F6DS is a 0/12 - 6/12 pitch galvanized dead soft aluminum flashing with an inner diameter of 4 inches by 6-5/8 inches. The flashing is used with DirectVent Pro DuraVent venting. This is an OEM DuraVent venting component.

58DVA-F6DS is a 0/12 - 6/12 pitch galvanized dead soft aluminum flashing with an inner diameter of 5 inches by 8 inches. The flashing is used with DirectVent Pro DuraVent venting. This is an OEM DuraVent venting component.

46DVA-F12DS is a 7/12 - 12/12 pitch galvanized dead soft aluminum flashing with an inner diameter of 4 inches by 6-5/8 inches. The flashing is used with DirectVent Pro DuraVent venting. This is an OEM DuraVent venting component.

58DVA-F12DS is a 7/12 - 12/12 pitch galvanized dead soft aluminum flashing with an inner diameter of 5 inches by 8 inches. The flashing is used with DirectVent Pro DuraVent venting. This is an OEM DuraVent venting component.

46DVA-ADP is a galvanized appliance adapter with an inner diameter of 4 inches by 6-5/8 inches. Appliance adapter attaches to appliance outlet allowing pipe to easily connect or disconnect. This is used with double wall DirectVent Pro pipe. Old Part #...

770-994 is a 5 inch by 8 inch rigid astrocap pipe adapter. This adapter is only required when using rigid DuraVent Pro pipe. Starter collar reducer 5x8 to 4x6 5/8 is needed with the adapter. This is an OEM DuraVent venting component.

DVP-SLP24 is a DVP to SLP 24 Inch Pipe Length Adapter. This is an OEM Majestic Venting Component.

DVP-2SL is a DVP to SLP Adapter. This adapter converts 8 inch pipe to 6-5/8 inch. This is an OEM Majestic Venting Component.

46DVA-ES is a galvanized elbow strap with a inner diameter of 4 inches x 6-5/8 inches. This is an OEM DuraVent venting component.

58DVA-ES is a galvanized elbow strap with a inner diameter of 5 inches x 8 inches. This is an OEM DuraVent venting component.

46DVA-VCE is a galvanized extended vertical termination cap with an inner diameter of 4 inches x 6-5/8 inches. This is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

58DVA-VCE is a galvanized extended vertical termination cap with an inner diameter of 5 inches x 8 inches. This is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

Firestop Shield 4"x7" venting used on old Majestic and Vermont Castings heating units. Call us for additional 7TDV product. Genuine OEM part    

46DVA-FF is a galvanized flat roof flashing with inner diameter dimensions of 4 inches by 6-5/8 inches. This is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

58DVA-FF is a galvanized flat roof flashing with inner diameter dimensions of 5 inches by 8 inches. This is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

Regency Flex Length 2" X 35' Flex Liner - 948-316 Regency Gas Inserts L234 LRI3E HRI3E May work with other units.  Check installation manual for compatibility. Recommend using Vertical Vent Cap Co-Linear 946-582 with this. Genuine OEM Part