Venting

IM BM0083 is a 6 inch diameter assembled tee in black from Imperial. Cap (IM BM0029) sold separately.

IM BM0037 is a 6 inch diameter oval to round pipe in black from Imperial. 

IM BM0034 is a 6 inch diameter drawband in black from Imperial. Connects stove pipe to appliances with flue collars that are slightly larger than the stove pipe.

Ultra Black Double Wall Stove Pipe series. 6" diameter Masonry Adapter (12” long) thimble sleeve to connect UB at thimble. Comes with flat trim ring.   Genuine OEM Part

6DTC-FP12 is a peaked roof flashing 8/12 – 12/12 with a diameter of 6 inches. This is used with DuraTech pipe and is an OEM DuraVent venting component. ***This is a special order item.***

6DTP-FP12 is a peaked roof flashing 8/12 – 12/12 with a diameter of 6 inches. This is used with DuraPlus pipe and is an OEM DuraVent venting component. This is a special order item.

6" x 25' Stainless Steel Chimney Liner Kit for Wood Inserts (includes appliance adapter, 25' pre-insulated stainless steel liner, top plate, chimney cap) - DBP625BK

Recommended for installations with poor draft, the draw collar heats up your chimney to ensure a proper draft. Fits 6" flue.

3PVP-E90B is a black 90 degree elbow with a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

6DP-KOUT is used for through-the-wall installations of DuraPlus venting. This kit includes: DVL/DuraBlack Chimney Adapter, Snap-Lock Adapter, 9" DuraPlus [Triple-Wall] Chimney Pipe, Wall Thimble, Tee WithCap, [2] Adjustable Wall Strap, Tee Support...

6DP-KMFG is used for manufactured home through-the-roof installations. This kit includes : DVL/DuraBlack Chimney Adapter, 24" Square Ceiling Support Box Withbuilt-in starter section and trim, Adjustable Flashing 0/12 - 6/12, Chimney Cap, Storm Collar,...

6DP-CCS60 is a 6 inch to 8 inch diameter close clearance shield that is 60 inches tall. This is used with DuraPlus triple-wall pipe and is an OEM DuraVent venting component.

6DP-CCS48 is a 6 inch to 8 inch diameter close clearance shield that is 48 inches tall. This is used with DuraPlus triple-wall pipe and is an OEM DuraVent venting component.

6DP-CCS36 is a 6 inch to 8 inch diameter close clearance shield that is 36 inches tall. This is used with DuraPlus triple-wall pipe and is an OEM DuraVent venting component.

6DP-IS is a 6 inch to 8 inch diameter attic insulation shield for use with DuraPlus triple-wall pipe. This is an OEM DuraVent venting component.

6DP-SC is a 6 inch to 8 inch diameter storm collar for DuraPlus triple-wall pipe. This is an OEM DuraVent venting component.