Venting

4PVP-F12DS is a 4 inch diameter dead soft aluminum adjustable roof flashing for 7/12-12/12 pitch. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP304-35KFB is a 304 length factory-built chimney reline kit. This kit includes a vertical cap, storm collar, support bracket, ventilation disk, centering bracket, 12 inch length of pipe, flex connector, 35 foot flex length, adjustable band and a flex...

4PVP316-35KFB is a 316 length factory-built chimney reline kit. This kit includes a vertical cap, storm collar, support bracket, ventilation disk, centering bracket, 12 inch length of pipe, flex connector, 35 foot flex length, adjustable band and a flex...

4PVP-ADFF is a Galvalume female flex adapter with a 4 inch diameter for PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-FTC is a black flex trim collar with a 4 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-AIK is a 4 inch diameter fresh air intake kit. This kit includes a faceplate with screen, moisture barrier, aluminum flex and two clamps. This is used with PelletVent Pro pipe and is an OEM DuraVent venting kit.

4PVP-KHA is a 4 inch diameter horizontal termination kit. This kit includes a round horizontal cap, wall thimble for a 1 inch clearance and a black appliance adapter/increaser to go from 3 inch diameter to 4 inch diameter. This pellet vent is used with...

4PVP-HC2 is a stainless steel 4 inch diameter horizontal cap with tapered end. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-HS is a galvalume house shield with a 4 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-T3B1 is a black 4 inch diameter increaser tee with clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-T31 is a galvalume 4 inch diameter increaser tee with clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-ADFM is a galvalume male flex adapter with a 4 inch diameter for PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-VCTB34 is a black prairie termination cap with a 4 inch exhaust and 3 inch air intake. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-VCT34 is a stainless steel prairie termination cap with a 4 inch exhaust and 3 inch air intake. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-ADS is a galvalume quick release PelletVent adapter with a 4 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-RC is a 4 inch diameter black reduction collar for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.