Venting

3PVP-X4 is a galvalume 3 inch to 4 inch increaser for a PelletVent Pro pipe. This is an OEM DuraVent venting component.

3PVP-TADX4B1 is a black increaser adapter with clean-out tee cap. This increaser takes the pipe from a 3 inch diameter to a 4 inch diameter. The increaser adapter is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-TADX41 is a galvalume increaser adapter with clean-out tee cap. This increaser takes the pipe from a 3 inch diameter to a 4 inch diameter. The increaser adapter is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-T3B1 is a black 4 inch diameter increaser tee with clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-T31 is a galvalume 4 inch diameter increaser tee with clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

6DT-IWT is a 6 inch diameter insulated wall thimble for use with DuraTech pipe. This is an OEM DuraVent venting component.

8DT-IWT is a insulated wall thimble. Adjusts from a minimum of 5½“ to a maximum of 9½” wall thickness, fits between standard wall studs and the interior trim is painted black. To accommodate thicker walls, the telescoping pieces can be extended up to 16”...

6DT-F6L is a large base adjustable roof flashing with a pitch of 0/12 - 6/12. This flashing has a 6 inch diameter and is used with DuraTech pipe. The flashing is an OEM DuraVent venting component.

8DT-F6L is a 8 inch diameter 0/12-6/12 large base adjustable roof flashing for use with DuraTech venting. This is a genuine manufacturer venting component.

6DT-F12L is a large base adjustable roof flashing with a pitch of 7/12 - 12/12. This flashing has a 6 inch diameter and is used with DuraTech pipe. The flashing is an OEM DuraVent venting component.

8DT-F12L is a 8 inch diameter 7/12-12/12 large base adjustable roof flashing for use with DuraTech venting. This is a genuine manufacturer venting component.

6DT-LB is a DuraTech locking band with a 6 inch diameter. This is an OEM DuraVent venting component.

8DT-LB is an 8 inch diameter locking band to be used with DuraVent chimney systems. This is a genuine manufacturer venting component.

3PVP-ADFM is a 3 inch diameter galvalume male flex adapter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-ADFM is a galvalume male flex adapter with a 4 inch diameter for PelletVent Pro pipe. This is an OEM DuraVent venting component.

6DLR-MTSC1 is a black masonry thimble with the slip connector. This thimble has an inner diameter of 6 inches and is used with DVL venting. This is an OEM DuraVent venting component.