Venting

58DVA-AD-M2 is a Monitgo termination adapter with an inner diameter of 5 inches x 8 inches. This is used with DirectVent Pro pipe. Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing.  ApplicationsDirectVent®...

6DVL-ORAD is a black double-wall oval to round stove adapter with a 6 inch inner diameter. This is used with DVL pipe. DVL’s double-wall, air-insulated design reduces clearances to combustibles from 18" to 6", the closest clearance to a wall...

6DTP-FP12 is a peaked roof flashing 8/12 – 12/12 with a diameter of 6 inches. This is used with DuraPlus pipe. This is a special order item. DuraPlus® is designed to stay cool on the outside, to provide a hot draft on the inside, to boost stove...

6DTC-FP12 is a peaked roof flashing 8/12 – 12/12 with a diameter of 6 inches. This is used with DuraTech pipe. ***This is a special order item.***With a Thermal Tech blanket insulation encased between dual walls, DuraTech offers the optimum in...

Power Vent Adapter 6DVL to SV4.5 [6DVL4.5PVA], 6DVL Gas Direct Vent, Lock System. Additional venting is required to complete the venting system based on the structure. Recommend using High Temperature Silicone (SIL500) to install. Genuine OEM Part

3PVP-VCTB33 is a black prairie termination cap with a 3 inch exhaust vent and a 3 inch air intake. This is used with PelletVent Pro pipe. ApplicationsPelletVent Pro® is a venting system designed for stoves and inserts that use wood pellets and oil...

4PVP-VCTB34 is a black prairie termination cap with a 4 inch exhaust and 3 inch air intake. This is used with PelletVent Pro pipe. ApplicationsPelletVent Pro® is a venting system designed for stoves and inserts that use wood pellets and oil fuel. It...

3PVP-VCT33 is a stainless steel prairie termination cap with a 3 inch exhaust vent and a 3 inch air intake. This is used with PelletVent Pro pipe. ApplicationsPelletVent Pro® is a venting system designed for stoves and inserts that use wood pellets...

4PVP-VCT34 is a stainless steel prairie termination cap with a 4 inch exhaust and 3 inch air intake. This is used with PelletVent Pro pipe. ApplicationsPelletVent Pro® is a venting system designed for stoves and inserts that use wood pellets and oil...

3PVP-ADS is a galvalume quick release PelletVent adapter with a 3 inch diameter. ApplicationsPelletVent Pro® is a venting system designed for stoves and inserts that use wood pellets and oil fuel. It is also built to vent biofuel products such as...

4PVP-ADS is a galvalume quick release PelletVent adapter with a 4 inch diameter. This is used with PelletVent Pro pipe. ApplicationsPelletVent Pro® is a venting system designed for stoves and inserts that use wood pellets and oil fuel. It is also...

DVP-TRAP2 is a horizontal termination cap with long flue, attached slip and wall shield with heat shield. 5 3/8/" - 9 3/8"   Genuine OEM Part

DVP-TRAP1 is a Horizontal Termination cap with short flue. This cap has the slip, wall shield and heat shield attached. Genuine OEM Part

DVP-RVTK is a Rear Vent Termination Kit. This kit includes adjacent Termination Cap, 1 Inch Firestop and a 9 Inches to 12 Inches Adjacent Termination Pipe.

6DT-CS24RIS-2 is a 24 inch reduced square ceiling support box with attic insulation shield. This has an inner diameter of 6 inches and is used with DuraTech pipe. With a Thermal Tech blanket insulation encased between dual walls, DuraTech offers the...

58DVA-X46 is a reducer from a inner diameter of 5 inches x 8 inches to an inner diameter of 4 inches by 6 5/8 inches. This is used with DirectVent Pro pipe. Stunning design and Engineered Excellence® utilizing state-of-the art manufacturing. ...