Venting

6/12-10/12 Flashing [7SPF10], 7 Inch Snap-Pak Wood Chimney, Built to UL103HT. Additional venting is required to complete the venting system based on the structure. Genuine OEM Part

8DT-60CF is a 60 inch length of galvalume double wall stove pipe with carton fiber. This pipe has a 8 inch diameter and is used with DuraVent systems.With a Thermal Tech blanket insulation encased between dual walls, DuraTech offers the optimum in safety...

6DT-60CF is a galvanized 60 inch long piece of stove pipe with carton filler and a diameter of 6 inches. This is used with DuraTech pipe.With a Thermal Tech blanket insulation encased between dual walls, DuraTech offers the optimum in safety and...

8DT-60SSCF is a 60 inch length of stainless steel double wall stove pipe with carton fiber. This pipe has an 8 inch diameter and is used with DuraVent chimney systems.With a Thermal Tech blanket insulation encased between dual walls, DuraTech offers the...

6DT-60SSCF is a stainless steel 60 inch long piece of stove pipe with carton filler and a diameter of 6 inches. This is used with DuraTech pipe.With a Thermal Tech blanket insulation encased between dual walls, DuraTech offers the optimum in safety and...

7DT-SC is a 7" & 8" Storm Collar made of aluminum. Required with DuraTech flashing to create a weather-proof penetration through the roof deck. Seal inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant.With a...

7DT-TCR is a 7" & 8" Trim Collar for Round Support Box. This black round trim collar conceals the gap between the Round Ceiling Support Box and the ceiling cutout.With a Thermal Tech blanket insulation encased between dual walls, DuraTech offers the...

7DT-TC is a 7" & 8" Trim Collar for Round Support Box. This black square trim collar conceals the gap between the Round Ceiling Support Box and the ceiling cutout.With a Thermal Tech blanket insulation encased between dual walls, DuraTech offers the...

7DVL-X8 is black double-wall 7 inches to 8 inches increaser for used with DVL pipe. DVL’s double-wall, air-insulated design reduces clearances to combustibles from 18" to 6", the closest clearance to a wall of any connector pipe. DVL improves...

7" Snap-Pak Chimney System goes to IHP wood burning fireplaces. Instructions

7" Snap-Pak Chimney System goes to IHP wood burning fireplaces. List of Venting Instructions

RF371 is a roof flashing for 7/12 to 12/12 pitch. This is used with the SL300 series chimney. Genuine OEM Part

TCT375 is a 8 Inch terra cotta vertical termination cap. The TCT375 cap is used with the SL300 series pipe. Genuine OEM Part

8DVL-X7 is a black double-wall 8 inches to 7 inches reducer for use with DVL pipe. DVL’s double-wall, air-insulated design reduces clearances to combustibles from 18" to 6", the closest clearance to a wall of any connector pipe. DVL improves...

6DBK-XS8 is a 8" Diameter Slip Increaser with Trim 6"-8" [Black] with an inner diameter of 6 inches. This is used with DuraBlack DuraVent. DuraBlack is an economical, Drip free, single-wall stovepipe with die-formed end fittings.  ...

0001861 is a black double wall 8-inch oval to 6-inch round Duravent stove pipe adapter used on Vermont Castings Stoves. This works on the DVL Series. For Vermont Castings Models: Defiant 1975 Defiant 1976 Defiant 1977 Defiant 1910 Defiant 1945 Defiant...