Venting

58DVA-HC is an aluminum square horizontal termination cap with an inner diameter of 5 inches by 8 inches. This cap is used with Direct Vent Pro pipe. Old Part # 1285 This is an OEM DuraVent venting component.

    ***Clearance***   58DVA-HC is an aluminum square horizontal termination cap with an inner diameter of 5 inches by 8 inches. This cap is used with Direct Vent Pro pipe. One corner has a small wrinkle in the metal. Non-Returnable. ...

46DVA-HC-C is a copper square horizontal termination cap with an inner diameter of 4 inches by 6-5/8 inches. This cap is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

58DVA-HC-C is a copper square horizontal termination cap with an inner diameter of 5 inches by 8 inches. This cap is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

46DVA-HC-S is a stainless steel square horizontal termination cap with an inner diameter of 4 inches by 6-5/8 inches. This cap is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

58DVA-HC-S is a stainless steel square horizontal termination cap with an inner diameter of 5 inches by 8 inches. This cap is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

Starter Collar Increaser [4x6 5/8 to 5x8] - 946-605 for gas venting Genuine OEM Part

58DVA-F12 is a galvanized steep roof flashing with an inner diameter of 5 inches by 8 inches. This is used with DuraVent DirectVent Pro Pipe. This is an OEM DuraVent venting component.

46DVA-SC is a galvanized storm collar with inner diameter dimensions of 4 inches by 6-5/8 inches. This storm collar is used with DirectVent Pro DuraVent pipe. This is an OEM DuraVent venting component.

58DVA-SC is a galvanized storm collar with inner diameter dimensions of 5 inches by 8 inches. This storm collar is used with DirectVent Pro DuraVent pipe. This is an OEM DuraVent venting component.

LINK-STOVE is a Stove Adapter Kit. This kit includes 30 feet of 4 inch Flex, adapters, wall thimble, masonry, zero clearance flashing, 991DA cap and fasteners. This is an OEM venting component.

SV4.5HT-2, Horizontal Termination Kit includes firestop/spacer [H2246], termination, slip piece [74L61]. Additional venting is required to complete the venting system based on the structure. This is for rigid pipe use.  If using flex pipe use H1969...

DVP-TRFK is the Thru Roof Flex Termination Kit from Majestic. This includes the Vertical Termination Cap with Storm Collar, 24 Inch DVP Pipe/Roof Support and Flex Adapters. This is an OEM Majestic Termination Kit.

SLP-TRAPK1 is a top vent horizontal termination kit number 1. This kit includes a horizontal trapezoid termination, slip section, wall shield and 90 degree elbow. This is an OEM Majestic venting component.

SLP-TRAPK2 is a top vent horizontal termination kit #2. The kit includes the horizontal trapezoid termination, slip section, wall shield and 90 degree elbow. Genuine OEM Venting Component.

DVP-HSFTK is a Horizontal Vent Termination Kit from Majestic. This Kit includes Adjacent Termination Cap, 1 Inch Firestop, 30 Inch Flex and Adapters. Recommend using High Strength Silicone (SIL500) and High Temperature Sealant (Millpac) to install...