Venting

SLP-TRAP1 is a Horizontal Trapezoid Termination with short flue and slip adjustiable 3-1/8 inches to 4-5/8 Inches. The termination also includes the wall firestop. This is an OEM Majestic Venting Component.

SLP-TRAP2 is a Horizontal Trapezoid Termination for wall thickness 5-1/4 inches to 9-1/4 inches. This is an OEM Majestic venting component.

SLP-SK-BK is a horizontal trapezoid termination kit. This kit includes one adapter, one horizontal high wind trapezoid termination, one black decorative wall thimble cover, one 24 inch length of black pipe, one 6 inch length of black pipe, one 2 inch to...

946-604/P is a horizontal vent guard and is required when the AstroCapXL is installed above grade at 7 feet or lower. Genuine OEM part

46DVA-HCL33 is a 4 inch by 6-5/8 inch diameter horizontal vent kit for use with direct vent inserts. This kit includes an aluminum co-linear termination cap, hardware for flex attachment and two 10 foot by 3 inches aluminum flex liners. This is used with...

46DVA-HCL34 is a 4 inch by 6-5/8 inch diameter horizontal vent kit for use with direct vent inserts. This kit includes an aluminum co-linear termination cap, hardware for flex attachment, one 10 foot by 3 inches aluminum flex liner and one 10 foot by 4...

SLP-HVS is a Horizontal Vent Support Hanger that is used with SL Pipe. This is an OEM Majestic Venting Component.

DVP-HVTK is the Horizontal Vent Termination Kit from Majestic. This Kit Includes an Adjacnet Termination Cap, 1 Inch Firestop, 3 Inch Firestop, 90 Degree Elbow and a 9 Inch to 12 Inch Termination Pipe. This is a genuine Majestic Termination Kit.

46DVA-WG is a galvanized horizontal windguard for use with DirectVent Pro 4 inch by 6-5/8 inch inner diameter pipe. This is an OEM DuraVent venting component.

46DVA-X58 is a galvanized 4 inch by 6-5/8 inch to 5 inch by 8 inch increaser. This is used with DirectVent pipe and is an OEM DuraVent venting component.

46DVA-VC is a galvanized low profile termination cap with an inner diameter dimension of 4 inches by 6-5/8 inches. The low profile cap is used with DirectVent Pro pipe and is an OEM DuraVent venting component.

58DVA-VC is a galvanized low profile termination cap with an inner diameter dimension of 5 inches by 8 inches. The low profile cap is used with DirectVent Pro pipe and is an OEM DuraVent venting component.

46DVA-VC-S is a stainless steel low profile termination cap with an inner diameter dimension of 4 inches by 6-5/8 inches. The low profile cap is used with DirectVent Pro pipe and is an OEM DuraVent venting component.

58DVA-VC is a stainless steel low profile termination cap with an inner diameter dimension of 5 inches by 8 inches. The low profile cap is used with DirectVent Pro pipe and is an OEM DuraVent venting component.

46DVA-KMC is a masonry chimney conversion kit with a diameter of 4 inches by 6-5/8 inches. This kit includes aluminum exterior cap adapter, top-plate flashing, round ceiling support, wall thimble cover and a black interior retro connector. This is used...

46DVA-KCT is a 4 inches by 6-5/8 inches masonry chimney conversion kit. This kit includes an aluminum exterior cap adapter and a top-plate flashing. The kit is used with DirectVent pipe and is an OEM DuraVent venting component.