Wood

6DT-IWT is a 6 inch diameter insulated wall thimble for use with DuraTech pipe. This is an OEM DuraVent venting component.

8DT-IWT is a insulated wall thimble. Adjusts from a minimum of 5½“ to a maximum of 9½” wall thickness, fits between standard wall studs and the interior trim is painted black. To accommodate thicker walls, the telescoping pieces can be extended up to 16”...

JB877 is a Joint Band for 8 Inner/10.5 Outer Chimney SL300 series pipe. This is an OEM Majestic venting component.

JB577 is a Joint Bands for the SL1100 Series pipe. This is used to seal pipe connections at the joints.

6DT-F6L is a large base adjustable roof flashing with a pitch of 0/12 - 6/12. This flashing has a 6 inch diameter and is used with DuraTech pipe. The flashing is an OEM DuraVent venting component.

8DT-F6L is a 8 inch diameter 0/12-6/12 large base adjustable roof flashing for use with DuraTech venting. This is a genuine manufacturer venting component.

6DT-F12L is a large base adjustable roof flashing with a pitch of 7/12 - 12/12. This flashing has a 6 inch diameter and is used with DuraTech pipe. The flashing is an OEM DuraVent venting component.

8DT-F12L is a 8 inch diameter 7/12-12/12 large base adjustable roof flashing for use with DuraTech venting. This is a genuine manufacturer venting component.

6DT-LB is a DuraTech locking band with a 6 inch diameter. This is an OEM DuraVent venting component.

8DT-LB is an 8 inch diameter locking band to be used with DuraVent chimney systems. This is a genuine manufacturer venting component.

6DP-KMFG is used for manufactured home through-the-roof installations. This kit includes : DVL/DuraBlack Chimney Adapter, 24" Square Ceiling Support Box Withbuilt-in starter section and trim, Adjustable Flashing 0/12 - 6/12, Chimney Cap, Storm Collar,...

6DLR-MTSC1 is a black masonry thimble with the slip connector. This thimble has an inner diameter of 6 inches and is used with DVL venting. This is an OEM DuraVent venting component.

8DVL-MTSC1 is a black masonry thimble with slip connector for 8 inch diameter DVL pipe. This is an OEM DuraVent venting component.

Offset flue adapter may be required for installations into deep fireplacesGenuine OEM part

The 5700-007 Hearthstone offset adapter moves the connection point between the insert and the chimney liner up to 6 inches back. This is designed for the Green Mountain inserts.

Replacement outside air kit for IronStrike wood stoves with leg kits. Fits the following models: IronStrike Wood Stoves: STRIKER S160 (leg models only) STRIKER SWS160 (leg models only) PERFORMER S210 (leg models only) May fit other models, check...