Pellet

3PVP-X8 is a black chimney adapter that is used to transition from 3 inch diameter PelletVent Pro pipe to a 8 inch diameter DuraVent pipe. This is an OEM DuraVent venting component.

3PVP-COB1 is a black clean-out tee cap with a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-CO1 is a galvalume clean-out tee cap with a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-DBTB1 is a black double tee with clean-out tee cap and a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-DBT1 is a galvalume double tee with clean-out tee cap and a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-F6DS is a Dead Soft Aluminum Adjustable Roof Flashing with a 0/12-6/12 pitch. This has a 3 inch diameter and is used with PelletVent Pro pipe. It is also a OEM DuraVent venting component.

3PVP-F12DS is a Dead Soft Aluminum Adjustable Roof Flashing with a 7/12-12/12 pitch. This has a 3 inch diameter and is used with PelletVent Pro pipe. It is also a OEM DuraVent venting component.

3PVP304-20KFB is a 304 length factory-built chimney reline kit. This kit includes a vertical cap, storm collar, support bracket, ventilation disk, centering bracket, 12 inch length of pipe, flex connector, flex length adjustable band and a flex adapter...

3PVP316-20KFB is a 304 length factory-built chimney reline kit. This kit includes a vertical cap, storm collar, support bracket, ventilation disk, centering bracket, 12 inch length of pipe, flex connector, flex length adjustable band and a flex adapter...

3PVP-ADFF is a galvalume female flex adapter with a 3 inch diameter. This is used with a PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-FTC is a black 3 inch diameter flex trim collar for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

3PVP-AIK is a 3 inch diameter fresh air intake kit. This kit includes a faceplate with screen, moisture barrier, aluminum flex and two clamps. This is used with PelletVent Pro pipe and is an OEM DuraVent venting kit.

3PVP-HC2 is a stainless steel horizontal cap with tapered end and a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-KHA is a 3 inch diameter horizontal termination kit. This kit includes a round horizontal cap, wall thimble for a 1 inch clearance and a black appliance adapter. This pellet vent is used with PelletVent Pro pipe and is an OEM DuraVent venting kit.

3PVP-HS is a galvalume house shield with a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-X4 is a galvalume 3 inch to 4 inch increaser for a PelletVent Pro pipe. This is an OEM DuraVent venting component.