Venting

46DVA-KHC is a horizontal termination kit. This kit includes 90 Degree black Elbow, Wall Thimble, Ceiling Support/Wall Thimble Cover, 24” black Pipe, 8 1?2” black Pipe Extension. Termination cap not included. The inner diameter dimension is 4 inches by...

46DVA-KHA is a horizontal termination kit. This kit includes 90 Degree black Elbow, Ceiling Support/Wall Thimble Cover, 24” black Pipe, 8 1?2” black Pipe Extension. Termination cap not included. The inner diameter dimension is 4 inches by 6-5/8 inches...

4PVP316-35KFB is a 316 length factory-built chimney reline kit. This kit includes a vertical cap, storm collar, support bracket, ventilation disk, centering bracket, 12 inch length of pipe, flex connector, 35 foot flex length, adjustable band and a flex...

4PVP304-35KFB is a 304 length factory-built chimney reline kit. This kit includes a vertical cap, storm collar, support bracket, ventilation disk, centering bracket, 12 inch length of pipe, flex connector, 35 foot flex length, adjustable band and a flex...

4PVP-CC is a 4 inch diameter galvalume C-Clamp for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

The 4PVP-X8 is a PelletVent Pro chimney adapter that is used to transition between 4 inch PelletVent Pro pipe to existing chimney that is 8 inches and DuraVent brand. 4PVP-X8 is a OEM DuraVent venting component.

The 4PVP-X7 is a PelletVent Pro chimney adapter that is used to transition between 4 inch PelletVent Pro pipe to existing chimney that is 7 inches and DuraVent brand. 4PVP-X7 is a OEM DuraVent venting component.

The 4PVP-X6 is a PelletVent Pro chimney adapter that is used to transition between 4 inch PelletVent Pro pipe to existing chimney that is 6 inches and DuraVent brand. 4PVP-X6 is a OEM DuraVent venting component.

4PVP-GA1 is a package of 12, 4 inch diameter replacement gasket for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-GA is a 4 inch diameter replacement gasket for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-RC is a 4 inch diameter black reduction collar for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-F12DS is a 4 inch diameter dead soft aluminum adjustable roof flashing for 7/12-12/12 pitch. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-F6DS is a 4 inch diameter dead soft aluminum adjustable roof flashing for 0/12-6/12 pitch. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-FF is a 4 inch diameter tall cone roof flashing for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-F12 is a 4 inch diameter steep roof flashing for use with PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-F6 is a galvalume 4 inch diameter adjustable roof flashing for a 0/12-6/12 pitch. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.