Venting

946-770 is a vertical flex additional floor kit. This kit includes a ceiling firestop and a firestop spacer that is used to prevent debris from falling into the firestop. Genuine OEM part

946-769 is a vertical flex extension kit with a diameter of 5 inches by 8 inches. This kit includes 20 feet of flex pipe with 10 spacers, 3 wall straps, flex to flex adaptor, hardware and instruction sheet. Genuine OEM part

946-772 is a 20 foot vertical flex kit with a diameter of 5 inches by 8 inches. This kit includes 20 feet of flex pipe with 10 spacers, 3 wall straps, ceiling firestop, firestop spacer, brackets, flex to rigid adaptor, roof support, 36 inch rigid...

To achieve the maximum rated efficiency. Genuine OEM part

To achieve the maximum rated efficiency of 60% HHV  Genuine OEM part

8DP-VC is a 8 inch diameter chimney cap for use with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.

8DP-XRB is a 8 inch diameter extended roof bracket for use with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.

8DP-F12DSA is a dead soft aluminum adjustable roof flashing with a pitch of 7/12-12/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F6DSA is a dead soft aluminum adjustable roof flashing with a pitch of 0/12-6/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F24 is a galvalume ventilated adjustable roof flashing with a pitch of 19/12-24/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F18 is a galvalume ventilated adjustable roof flashing with a pitch of 13/12-18/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F12 is a galvalume ventilated adjustable roof flashing with a pitch of 7/12-12/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F6 is a galvalume ventilated adjustable roof flashing with a pitch of 0/12-6/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-FF is a tall cone ventilated galvalume flat roof flashing. The flat roof flashing has a 8 inch diameter and is used with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.

8DP-FRS is a 8 inch diameter firestop with radiation shield for use with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.

8DP-WSSS is a stainless steel 8 inch diameter wall strap for use with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.