Venting

946-616 is a 10 foot run of horizontal flex vent termination. In the kit there is one extra large AstroCap, 10 feet of Z Flex 5 inch x 8 inch coaxial liner, vinyl siding standoff, wall thimble, screw, high temperature sealant, spacer springs and...

946-615 is a horizontal flex vent termination kit with a four foot run. This kit includes an extra large AstroCap, 4 feet of Z flex 5 inch by 8 inch coaxial liner, vinyl siding standoff, wall thimble, screw, high temperature sealant, spacer springs and...

770-994 is a 5 inch by 8 inch rigid astrocap pipe adapter. This adapter is only required when using rigid DuraVent Pro pipe. Starter collar reducer 5x8 to 4x6 5/8 is needed with the adapter. This is an OEM DuraVent venting component.

946-771 is a flex to flex adapter with a diameter of 5 inches by 8 inches. Genuine OEM part

946-770 is a vertical flex additional floor kit. This kit includes a ceiling firestop and a firestop spacer that is used to prevent debris from falling into the firestop. Genuine OEM part

946-769 is a vertical flex extension kit with a diameter of 5 inches by 8 inches. This kit includes 20 feet of flex pipe with 10 spacers, 3 wall straps, flex to flex adaptor, hardware and instruction sheet. Genuine OEM part

946-772 is a 20 foot vertical flex kit with a diameter of 5 inches by 8 inches. This kit includes 20 feet of flex pipe with 10 spacers, 3 wall straps, ceiling firestop, firestop spacer, brackets, flex to rigid adaptor, roof support, 36 inch rigid...

Recommended for installations with poor draft, the draw collar heats up your chimney to ensure a proper draft. Fits 6" flue.

3PVP-E90B is a black 90 degree elbow with a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

6DP-KOUT is used for through-the-wall installations of DuraPlus venting. This kit includes: DVL/DuraBlack Chimney Adapter, Snap-Lock Adapter, 9" DuraPlus [Triple-Wall] Chimney Pipe, Wall Thimble, Tee WithCap, [2] Adjustable Wall Strap, Tee Support...

6DP-KMFG is used for manufactured home through-the-roof installations. This kit includes : DVL/DuraBlack Chimney Adapter, 24" Square Ceiling Support Box Withbuilt-in starter section and trim, Adjustable Flashing 0/12 - 6/12, Chimney Cap, Storm Collar,...

6DP-CCS60 is a 6 inch to 8 inch diameter close clearance shield that is 60 inches tall. This is used with DuraPlus triple-wall pipe and is an OEM DuraVent venting component.

6DP-CCS48 is a 6 inch to 8 inch diameter close clearance shield that is 48 inches tall. This is used with DuraPlus triple-wall pipe and is an OEM DuraVent venting component.

6DP-CCS36 is a 6 inch to 8 inch diameter close clearance shield that is 36 inches tall. This is used with DuraPlus triple-wall pipe and is an OEM DuraVent venting component.

6DP-IS is a 6 inch to 8 inch diameter attic insulation shield for use with DuraPlus triple-wall pipe. This is an OEM DuraVent venting component.

6DP-SC is a 6 inch to 8 inch diameter storm collar for DuraPlus triple-wall pipe. This is an OEM DuraVent venting component.