Venting

7UT-12 is a 7" Diameter, 12" Ultra Temp Length, Ultra-Temp Chimney from Selkirk. Ultra-Temp is the superior choice with stainless steel inner liner and 430 stainless steel outer jacket for small residential applications to large custom chimney projects...

7" Snap-Pak Chimney System goes to IHP wood burning fireplaces. Instructions

7" Snap-Pak Chimney System goes to IHP wood burning fireplaces. List of Venting Instructions

946-516 is 10 feet of flex termination. In this kit is a AstroCap, 10 feet of Z flex, a coaxial liner, wall thimble, screws, high temperature sealant, spacer, springs and instruction sheet. This has a diameter of 4 inches x 6-7/8 inches. The kit is an...

946-515 is 4 feet of flex termination. In this kit is a AstroCap, 4 feet of Z flex, a coaxial liner, wall thimble, screws, high temperature sealant, spacer, springs and instruction sheet. This has a diameter of 4 inches x 6-7/8 inches. The kit is an OEM...

946-513 is a 2 foot termination flex kit with a diameter of 4 inches x 6-7/8 inches. This kit includes a AstroCap, 2 feet of Z flex, coaxial liner, wall thimble, screws, high temperature sealant, spacer springs and instruction sheet. This is an OEM...

7DP-VC is a 7 inch diameter DuraPlus triple wall chimney cap. This is an OEM DuraVent venting component.

7DP-XRB is a 7 inch diameter extended roof bracket for use with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.

7DP-F24 is a 7 inch diameter ventilated adjustable roof flashing with a pitch of 19/12-24/12. This is used with DuraPlus triple wall pipe and is an OEM DuraVent venting component.

7DP-F18 is a 7 inch diameter ventilated adjustable roof flashing with a pitch of 13/12-18/12. This is used with DuraPlus triple wall pipe and is an OEM DuraVent venting component.

7DP-F12 is a 7 inch diameter ventilated adjustable roof flashing with a pitch of 7/12-12/12. This is used with DuraPlus triple wall pipe and is an OEM DuraVent venting component.

7DP-F6 is a 7 inch diameter ventilated adjustable roof flashing with a pitch of 0/12-6/12. This is used with DuraPlus triple wall pipe and is an OEM DuraVent venting component.

7DP-FF is a 7 inch diameter tall cone ventilated flat roof flashing for use with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.

7DP-FRS is a firestop radiation shield with a 7 inch diameter. This is used with DuraPlus triple wall pipe and is an OEM DuraVent venting component.

7DP-WSSS is a stainless steel wall strap with a 7 inch diameter. This is used with DuraPlus triple wall pipe and is an OEM DuraVent venting component.

7DP-WS is a galvanized wall strap with a 7 inch diameter. This is used with DuraPlus triple wall pipe and is an OEM DuraVent venting component.