Venting

946-618 is a 6 foot run of horizontal flex vent termination. This kit includes on extra large AstroCap, 6 feet of Z flex 5 inches x 8 inches coaxial liner, vinyl siding standoff, wall thimble, screw, high temperature sealant, spacer springs and an...

946-616 is a 10 foot run of horizontal flex vent termination. In the kit there is one extra large AstroCap, 10 feet of Z Flex 5 inch x 8 inch coaxial liner, vinyl siding standoff, wall thimble, screw, high temperature sealant, spacer springs and...

946-615 is a horizontal flex vent termination kit with a four foot run. This kit includes an extra large AstroCap, 4 feet of Z flex 5 inch by 8 inch coaxial liner, vinyl siding standoff, wall thimble, screw, high temperature sealant, spacer springs and...

946-770 is a vertical flex additional floor kit. This kit includes a ceiling firestop and a firestop spacer that is used to prevent debris from falling into the firestop. Genuine OEM part

946-769 is a vertical flex extension kit with a diameter of 5 inches by 8 inches. This kit includes 20 feet of flex pipe with 10 spacers, 3 wall straps, flex to flex adaptor, hardware and instruction sheet. Genuine OEM part

946-772 is a 20 foot vertical flex kit with a diameter of 5 inches by 8 inches. This kit includes 20 feet of flex pipe with 10 spacers, 3 wall straps, ceiling firestop, firestop spacer, brackets, flex to rigid adaptor, roof support, 36 inch rigid...

46DVA-34CLTA is a Chimney Liner Termination Kit with a 4 inch by 6-5/8 inch diameter. In this kit is a top-plate flashing and adapter. This fits one 3 inch aluminum flex and one 4 inch aluminum flex to 4 inch by 6-5/8 inch pipe. This is also a OEM...

46DVA-CLTA is a Chimney Liner Termination Kit with a 4 inch by 6-5/8 inch diameter. In this kit is a top-plate flashing and adapter. This fits two 3 inch aluminum flex to 4 inch by 6-5/8 inch pipe. This is also a OEM DuraVent venting component.

46DVA-CT is a Chimney Liner Termination Kit with a 4 inch by 6-5/8 inch diameter. Includes: Top-Plate Flashing & Adapter Only [Fits one 4" Flex Liner & one 3" Flex Liner to 4" x 6 5/8" Pipe] [Aluminum]. This fits two 3 inch aluminum flex to 4 inch by...

46DVA-GK is a chimoney liner termination kit. This kit includes Termination Connector and Flashing. DirectVent Pro 4” x 6 5?8” Termination Caps, 3” Flex, and Co-Linear Flex Connectors are sold separately. The inner diameter dimension is 4 inches by 6-5/8...

46DVA-KHC is a horizontal termination kit. This kit includes 90 Degree black Elbow, Wall Thimble, Ceiling Support/Wall Thimble Cover, 24” black Pipe, 8 1?2” black Pipe Extension. Termination cap not included. The inner diameter dimension is 4 inches by...

46DVA-KHA is a horizontal termination kit. This kit includes 90 Degree black Elbow, Ceiling Support/Wall Thimble Cover, 24” black Pipe, 8 1?2” black Pipe Extension. Termination cap not included. The inner diameter dimension is 4 inches by 6-5/8 inches...

SLP-TRAPK1 is a top vent horizontal termination kit number 1. This kit includes a horizontal trapezoid termination, slip section, wall shield and 90 degree elbow. Genuine OEM Part

SLP-TRAPK2 is a top vent horizontal termination kit #2. The kit includes the horizontal trapezoid termination, slip section, wall shield and 90 degree elbow. Genuine OEM Part

SLP-TRAP1 is a Horizontal Trapezoid Termination with short flue and slip adjustiable 3-1/8 inches to 4-5/8 Inches. The termination also includes the wall firestop. Genuine OEM Part

SLP-SK-BK is a horizontal trapezoid termination kit. This kit includes one adapter, one horizontal high wind trapezoid termination, one black decorative wall thimble cover, one 24 inch length of black pipe, one 6 inch length of black pipe, one 2 inch to...