Venting

946-563 is a coaxial to colinear adapter kit. Genuine OEM part

510-994 is a rigid pipe adapter with a diameter of 4 inches x 6-5/8 inches. The adapter is only required when using rigid pipe. Genuine OEM part

948-367/P is a 4 inches by 6-7/8 inches flex to flex adapter. Genuine OEM part

770-994 is a 5 inch by 8 inch rigid astrocap pipe adapter. This adapter is only required when using rigid DuraVent Pro pipe. Starter collar reducer 5x8 to 4x6 5/8 is needed with the adapter. This is an OEM DuraVent venting component.

946-771 is a flex to flex adapter with a diameter of 5 inches by 8 inches. Genuine OEM part

46DVA-AD-M2 is a montigo termination adapter with a 4 inch by 6-5/8 inch diameter. This is used with DirectVent Pro pipe and is an OEM DuraVent venting component.

46DVA-AD-M1 is a montigo mount adapter with a 4 inch by 6-5/8 inch diameter. This is used with DirectVent Pro pipe and is an OEM DuraVent venting component.

46DVA-34CCL is a black co-axial to co-linear adapter for free standing stoves. This adapter fits one 3 inch flex liner and one 4 inch flex liner to a 4 inch by 6-5/8 inch pipe. This is also an OEM DuraVent venting component.

46DVA-CCL is a black co-axial to co-linear adapter for free standing stoves. This adapter fits two 3 inch flex liners to 4 inch by 6-5/8 inch pipe. This is also an OEM DuraVent venting component.

46DVA-ADP is a galvanized appliance adapter with an inner diameter of 4 inches by 6-5/8 inches. Appliance adapter attaches to appliance outlet allowing pipe to easily connect or disconnect. This is used with double wall DirectVent Pro pipe. Old Part #...

The 4PVP-X8 is a PelletVent Pro chimney adapter that is used to transition between 4 inch PelletVent Pro pipe to existing chimney that is 8 inches and DuraVent brand. 4PVP-X8 is a OEM DuraVent venting component.

The 4PVP-X7 is a PelletVent Pro chimney adapter that is used to transition between 4 inch PelletVent Pro pipe to existing chimney that is 7 inches and DuraVent brand. 4PVP-X7 is a OEM DuraVent venting component.

The 4PVP-X6 is a PelletVent Pro chimney adapter that is used to transition between 4 inch PelletVent Pro pipe to existing chimney that is 6 inches and DuraVent brand. 4PVP-X6 is a OEM DuraVent venting component.

4PVP-ADS is a galvalume quick release PelletVent adapter with a 4 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

4PVP-ADFM is a galvalume male flex adapter with a 4 inch diameter for PelletVent Pro pipe. This is an OEM DuraVent venting component.

4PVP-ADFF is a Galvalume female flex adapter with a 4 inch diameter for PelletVent Pro pipe. This is an OEM DuraVent venting component.