Venting

SV4.5HT-2, Horizontal Termination Kit includes firestop/spacer [H2246], termination, slip piece [74L61]. Additional venting is required to complete the venting system based on the structure. This is for rigid pipe use.  If using flex pipe use H1969...

4DT-VPVK is a 4" x 6 5/8" Diameter, VP "Through-the-Roof" Vertical Termination Kit, Pellet Vent from Selkirk. This kit includes: 3" pipe connector, 3 to 4" increaser, 4" tee with cap, pellet stove adapter, ceiling support, trim plate, roof flashing,...

4DT-VPHKB is a 4" x 6 5/8" Diameter, VP "Up & Out" Horizontal Termination Kit, [includes: 3VP,3VP-I4,4VP-TS,4DT-VPSAL,4DT-WT, 4DT-EL90SB, 4DT-VPTA,4DT-DDC,4DT-CAK] Pellet Vent from Selkirk. This kit includes: 3" pipe connector, 3 to 4" increaser, 4" tee...

4DT-VPHKA is a 4" x 6 5/8" Diameter, VP "Straight Out" Horizontal Termination Kit, Pellet Vent from Selkirk. This kit includes: 3" pipe connector, 3 to 4" increaser, pellet stove adapter, wall thimble, pellet stove termination adapter, decorative cone...

4DT-UPPVK is a 4" x 6 5/8" Diameter, Ulitimate Pellet Pipe "Through-the-Roof" Vertical Termination Kit, Pellet Vent from Selkirk. This kit includes: vertical temination cap, pellet stove adapter, 3-4" increaser tee with cap, ceiling support, termination...

4DT-UPPHKB is a 4" x 6 5/8" Diameter, Ulitimate Pellet Pipe "Up & Out" Horizontal Termination Kit, Pellet Vent from Selkirk. This kit includes: termination adapter, pellet stove adapter, 3-4" increaser tee with cap, wall thimble, 45 degree elbow, 90...

4DT-UPPHKA is a 4" x 6 5/8" Diameter, Ulitimate Pellet Pipe "Straight Out" Horizontal Termination Kit, Pellet Vent from Selkirk. This kit includes: termination adapter, 3UP and 4UPP pellet stove adaptes, 3-4" increaser, wall thimble, 45 degree elbow,...

4DT-VKC is a 4" x 6 5/8" Diameter, Vertical Termination Kit from Selkirk. This kit includes: adjustable flashing 0/12-6/12, appliance adapters, storm collar and vertical termination. Direct Temp is designed for aesthetic-minded hearth professionals for...

4DT-HKB is a 4" x 6 5/8" Diameter, Horizontal Termination Kit "B" from Selkirk. This kit includes: 90 degree elbow, wall thimble, horizontal termination, appliance adapter, 24" pipe, black round trim plate, and adjustable length pipe (4"-10"). Direct...

4DT-HKA is a 4" x 6 5/8" Diameter, Horizontal Termination Kit "A" from Selkirk. The kit includes: 90 degree elbow, wall thimble, horizontal termination, black round trim plate and appliance adapter. Direct Temp is designed for aesthetic-minded hearth...

380-946 is a AstroCap 1 Foot Direct Vent Stove Vent Kit. This kit includes a 12 inch rigid inner pipe, spacer springs, 12 inch rigid outer pipe, wall thimble, thimble cover, screws, sealant and a AstroCap. The kit has a diameter of 4 inches by 6-5/8...

946-516 is 10 feet of flex termination. In this kit is a AstroCap, 10 feet of Z flex, a coaxial liner, wall thimble, screws, high temperature sealant, spacer, springs and instruction sheet. This has a diameter of 4 inches x 6-7/8 inches. The kit is an...

946-515 is 4 feet of flex termination. In this kit is a AstroCap, 4 feet of Z flex, a coaxial liner, wall thimble, screws, high temperature sealant, spacer, springs and instruction sheet. This has a diameter of 4 inches x 6-7/8 inches. The kit is an OEM...

946-513 is a 2 foot termination flex kit with a diameter of 4 inches x 6-7/8 inches. This kit includes a AstroCap, 2 feet of Z flex, coaxial liner, wall thimble, screws, high temperature sealant, spacer springs and instruction sheet. This is an OEM...

946-756 is a 4 inch by 6-5/8 inch vertical flex extension kit that includes 20 feet of flex pipe, 10 spacers, 3 wall straps, flex to rigid adapter, hardware and instruction sheet. This is an OEM Regency venting kit.

946-755 is a vertical flex kit with a diameter of 4 inches x 6-5/8 inches. This kit includes 20 feet of flex pipe, 10 spacers, 3 wall straps, ceiling firestop, firestop spacers, brackets, flex to rigid adapter, roof support, 36 inch rigid DuraVent pipe,...