Venting

58DVA-HC is an aluminum square horizontal termination cap with an inner diameter of 5 inches by 8 inches. This cap is used with Direct Vent Pro pipe. Old Part # 1285 This is an OEM DuraVent venting component.

58DVA-H2 is a aluminum square horizontal H2 termination cap with an inner diameter of 5 inches by 8 inches. Use for standard and high-wind through-the-wall termination. Provides improved performance in high wind conditions. Features an adjustable air...

58DVA-HSCH is a galvanized high wind sconce termination cap with an inner diameter of 5 inches by 8 inches. The high wind sconce termination cap is used with DirectVent Pro Pipe. This is an OEM DuraVent venting component.

58DVA-HSC is a galvanized sconce termination cap with an inner diameter of 5 inches x 8 inches. This is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

58DVA-HRCS is a galvanized round horizontal termination cap with an inner diameter of 5 inches by 8 inches. This is used with the DirectVent Pro pipe. This is an OEM DuraVent venting component.

58DVA-F12DS is a 7/12 - 12/12 pitch galvanized dead soft aluminum flashing with an inner diameter of 5 inches by 8 inches. The flashing is used with DirectVent Pro DuraVent venting. This is an OEM DuraVent venting component.

58DVA-F6DS is a 0/12 - 6/12 pitch galvanized dead soft aluminum flashing with an inner diameter of 5 inches by 8 inches. The flashing is used with DirectVent Pro DuraVent venting. This is an OEM DuraVent venting component.

8DT-F6DSA is a 8 inch diameter adjustable 0/12 - 6/12 dead soft aluminum roof flashing for use with DuraTech venting. This is a genuine manufacturer venting component.

8DT-F12DSA is a 8 inch diameter 7/12-12/12 adjustable dead soft aluminum roof flashing for use with DuraTech venting. This is a genuine manufacturer venting component.

7DT-SC is a 7" & 8" Storm Collar made of aluminum. Required with DuraTech flashing to create a weather-proof penetration through the roof deck. Seal inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. This is...

95070325 is a BD flex aluminum liner that measures 3 inches x 25 feet. Genuine OEM Part

95070310 is a BD flex aluminum liner measuring 3 inches by 10 feet. Genuine OEM Part

Direct vent insert kit includes one each 4 feet and 30 feet liners, plus an aluminum termination cap.

Direct vent insert kit includes two 3 inches x 30 feet liners, plus an aluminum termination cap.