-
4''x 25' Round 2-Ply Aluminum Flex Liner Sold by the Roll - Flex409
National Chimney$365.89National Chimney’s 2-Ply 3003 aluminum liner can be used to vent Category I gas appliances with A.F.U.E. of 83% or lower. In many cases, especially when only water heaters are vented into masonry flues, the gas appliances are vented into oversized... -
C Clamp [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-CC
Duravent$44.584PVP-CC is a 4 inch diameter galvalume C-Clamp for use with PelletVent Pro pipe. This is an OEM DuraVent venting component. -
DSA Adjustable Roof Flashing 7/12 - 12/12 [Dead Soft Aluminum], 4" Diameter, PelletVent Pro - 4PVP-F12DS
Duravent$145.194PVP-F12DS is a 4 inch diameter dead soft aluminum adjustable roof flashing for 7/12-12/12 pitch. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component. -
DSA Adjustable Roof Flashing 0/12 - 6/12 [Dead Soft Aluminum], 4" Diameter, PelletVent Pro - 4PVP-F6DS
Duravent$137.004PVP-F6DS is a 4 inch diameter dead soft aluminum adjustable roof flashing for 0/12-6/12 pitch. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component. -
Adjustable Roof Flashing 0/12 - 6/12 [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-F6
Duravent$50.504PVP-F6 is a galvalume 4 inch diameter adjustable roof flashing for a 0/12-6/12 pitch. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component. -
Attic Insulation Shield [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-IS
Duravent$121.874PVP-IS is a 4 inch diameter galvalume attic insulation shield for use with the PelletVent Pro pipe. This is an OEM DuraVent venting component. -
Storm Collar [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-SC
Duravent$15.104PVP-SC is a 4 inch diameter galvalume storm collar for use with PelletVent Pro pipe. This is an OEM DuraVent venting component. -
House Shield [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-HS
Duravent$89.224PVP-HS is a galvalume house shield with a 4 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component. -
Adjustable Wall Strap [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-WSA
Duravent$63.804PVP-WSA is a galvalume adjustable wall strap with a 4 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component. -
Wall Strap [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-WS
Duravent$58.664PVP-WS is a galvalume wall strip with a 4 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component. -
Clean-Out Tee Cap [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-CO1
Duravent$89.224PVP-CO1 is a galvalume 4 inch diameter clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component. -
Double Tee With Clean-Out Tee Cap [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-DBT1
Duravent$495.834PVP-DBT1 is a galvalume 4 inch diameter double tee with clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component. -
Adapter Tee With Clean-Out Tee Cap [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-TAD1
Duravent$248.034PVP-TAD1 is a galvalume 4 inch diameter adapter tee with clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component. -
Increaser Tee With Clean-Out Tee Cap [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-T31
Duravent$241.334PVP-T31 is a galvalume 4 inch diameter increaser tee with clean-out tee cap. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component. -
Single Tee With Clean-Out Tee Cap [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-T1
Duravent$248.014PVP-T1 is a galvalume single tee with clean-out tee cap. This has a 4 inch diameter and is used with PelletVent Pro pipe, it is also an OEM DuraVent venting component. -
90 Degree Elbow [Galvalume], 4" Diameter, PelletVent Pro - 4PVP-E90
Duravent$222.614PVP-E90 is a galvalume 90 degree elbow with a 4 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.