Duravent

8DP-F24 is a galvalume ventilated adjustable roof flashing with a pitch of 19/12-24/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F18 is a galvalume ventilated adjustable roof flashing with a pitch of 13/12-18/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F12 is a galvalume ventilated adjustable roof flashing with a pitch of 7/12-12/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-F6 is a galvalume ventilated adjustable roof flashing with a pitch of 0/12-6/12. This is used with DuraPlus 8 inch diameter triple wall pipe and is an OEM DuraVent venting component.

8DP-FF is a tall cone ventilated galvalume flat roof flashing. The flat roof flashing has a 8 inch diameter and is used with DuraPlus triple wall pipe. This is an OEM DuraVent venting component.

4PVP-F6 is a galvalume 4 inch diameter adjustable roof flashing for a 0/12-6/12 pitch. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-FF is a galvalume tall cone roof flashing with a 3 inch diameter. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

3PVP-F6 is a galvalume 3 inch diameter adjustable roof flashing with a 0/12-6/12 pitch. This is used with PelletVent Pro pipe and is an OEM DuraVent venting component.

58DVA-CFK is a galvanized Counter Flashing Kit with inner diameter dimensions of 5 inches by 8 inches. Prevents water intrusion into stucco-sided homes. Allows the installer to apply siding material...

58DVA-FF is a galvanized flat roof flashing with inner diameter dimensions of 5 inches by 8 inches. This is used with DirectVent Pro pipe. This is an OEM DuraVent venting component.

58DVA-F12 is a galvanized steep roof flashing with an inner diameter of 5 inches by 8 inches. This is used with DuraVent DirectVent Pro Pipe. This is an OEM DuraVent venting component.

58DVA-F6 is a galvanized adjustable roof flashing with an inner diameter dimension of 5 inches by 8 inches. This is an OEM DuraVent venting component.

8DT-F12L is a 8 inch diameter 7/12-12/12 large base adjustable roof flashing for use with DuraTech venting. This is a genuine manufacturer venting component.

8DT-F6L is a 8 inch diameter 0/12-6/12 large base adjustable roof flashing for use with DuraTech venting. This is a genuine manufacturer venting component.

8DT-FF is a 8 inch diameter flat roof flashing that is used with DuraTech venting. This is a genuine manufacturer venting component.

8DT-F24 is a 8 inch diameter 19/12-24/12 adjustable roof flashing for use with DuraTech venting. This is a genuine manufacturer venting component.